Customized Size silk screen printing squeegee
Authentic Taiwan TUICO Squeegee 50*9 flat mouth 65/75/80/85 degrees brown
TUICO Squeegee is produced in Taiwan, Taiwan. TUICO's screen printing squeegee is made of TUICO adhesive with exclusive formula. The knife edge is flat, the texture is soft, wear-resistant and solvent-resistant, and good printing results can be obtained.
Its products are widely used in: electronics, PCB, textile, CD, LCD, plastic and other industries.
In order to meet the different printing needs of different products in various industries, we produce various specifications and various degrees of squeegee.
With more than 40 years of manufacturing experience, Taiwan TUICO's screen printing squeegee uses the exclusive formula of TUICO glue, the knife edge is flat, the texture is soft, wear-resistant, solvent-resistant, and good printing results.
TUICO brand screen printing squeegee has been continuously researched and innovated, and can be formulated with the most suitable formula for various solvents to achieve super wear resistance, long life, low expansion rate, and various shapes of squeegee to meet different printing. demand.
Features: Super wear resistant. Resistant to a variety of solvents. Resistant to aging. Good rebound at high temperatures. The appearance is straight. The knife edge is good.
SR series squeegee has good solvent resistance and wear resistance. It has many varieties, various hardnesses, various sizes and shapes to choose from. It is widely used. HR high quality series has better solvent resistance and more. High wear resistance.
1. Application: Cut the scraping glue with scissors or cutting machine to the appropriate size and insert it into the scraper holder; tighten the scraper screw, pay attention to the scraper to the horizontal state, and use it; let the ends of the scraper Have an appropriate distance from the edge of the screen and print with appropriate pressure;
2, cleaning: first wipe off too much ink with a cloth, then use a softer cloth with a suitable solvent to clean (do not use strong solvents, especially ink thinner to clean the squeegee), after grinding or before use The squeegee should be left idle to allow the solvent on it to completely evaporate;
3. Grinding: It can be ground in the general way: belt type, roller type, knife cutting type can only grind dry squeegee. After grinding, it can't be wiped with solvent immediately.
1. The squeegee must be installed in a horizontal state when it is used, so as not to affect the printing quality;
2. Avoid friction and collision with sharp objects and hard objects to avoid scratching the gap;
3. When the silk screen printing operation is completed, be sure to clean the scraper and scraper to prevent the ink from drying out and affecting the next use. "